Warranty Registration
Water bubbles will dry within the next 30 days, if they remain on your vehicle the bubbles will be addressed during your 30 day follow up.
During the next 30 days, PPF will shift and may cause some minor lifting. This is completely normal Any areas that may need trimming and/or readjusted will be addressed during your 30 day follow up.
The manufacturer’s warranty covers cracking, yellowing and peeling. It does not cover wear and tear from everyday driving.
If your car has no Ceramic Coating, we recommend using a quality Spray Sealant such as AENSO Gleam or Nanolex SiSplash to maintain and condition the film. This will keep the Top Coat protected from contaminants and easier to clean.
We recommend Hand Washing only. Avoid automatic tunnel washes with brushes as these can cause the PPF to lift or cause scratches on the Ceramic Coating. Avoid washing in direct sunlight to minimize streaking and water spotting. Avoid using a pressure washer on the edges of the film. Use quality car care chemicals and tools.
During the curing process, it is safe to drive in the rain. If your vehicle is wet, you may dry the vehicle with a high-powered air blower, leaf blower or simply rinse it through a touch-less car wash found in most gas stations.
These highly acidic contaminants can stain the Ceramic Coating or PPF if left on the film for too long. Avoid allowing these contaminants to “bake” in the sun and clean the area as soon as possible with a Quick Detail Spray and a soft Microfiber Towel.
Water contact and mineral deposits from sprinklers will create water spots, please wipe off immediately to avoid hard water spots.
Do not wash your vehicle for 2 weeks. Allow the PPF or Ceramic Coating to fully cure before washing your vehicle.
If absolutely necessary, always go to a touch free wash. Using an automated car wash with brushes will void the warranty and dull the coating.
Do not wipe the vehicle unless necessary, as mentioned above. Your coating is still soft during the first week. If you notice your car has water spots, bird droppings, tree sap or bug splatter, immediately remove it using a Quick Detail Spray or Waterless Wash and a soft Microfiber Towel. Be gentle when wiping the surface. Do not wipe or drag the towel across the surface, it will create scratches.
We recommend Hand Washing only. Avoid automatic tunnel washes with brushes as these can cause the PPF to lift or cause scratches on the Ceramic Coating. Avoid washing in direct sunlight to minimize streaking and water spotting. Avoid using a pressure washer on the edges of the film. Use quality car care chemicals and tools.
During the curing process, it is safe to drive in the rain. If your vehicle is wet, you may dry the vehicle with a high-powered air blower, leaf blower or simply rinse it through a touch-less car wash found in most gas stations.
These highly acidic contaminants can stain the Ceramic Coating or PPF if left on the film for too long. Avoid allowing these contaminants to “bake” in the sun and clean the area as soon as possible with a Quick Detail Spray and a soft Microfiber Towel.
Water contact and mineral deposits from sprinklers will create water spots, please wipe off immediately to avoid hard water spots.
Do not wash your vehicle for 2 weeks. Allow the PPF or Ceramic Coating to fully cure before washing your vehicle.
The warranty will cover any defects that may have occurred after installation. Covered defects include: discoloration, fading, bubbling, peeling, cracking, and delamination.
Use a microfiber towel slightly dampened with water to clean your windows. Use non-ammonia glass cleaners such as Adam’s Glass Cleaner or AENSO Pureview may also be used. Avoid the use of abrasive materials such as scouring pads, to clean your tinted windows.
Your window tint may have a hazy appearance or moisture bubbles for up to 30 days after installation. These conditions will disappear once the moisture used to apply your tint dries up completely.
Do not roll down your windows for 5 days while it’s drying.